most shopisticated way of oiling a machine
Heavy use of a paper shredder can be dangerous if you not oil regularly and properly.For heavy regular use can damage the motor,clog the shredder machine,dull the blades sharpness,dust can be stored etc problem comes.Maximum shredders give 1 year warranty.But if you not properly maintain your shredder that will not run so long then.There are two different method of oiling one is the way of using a paper to oil a shredder machine and another is without a paper oiling.You can also check top 5 shredder oil
The Paper Method:
First of all you have to take a piece of a paper be sure that paper will not crease and damaged.Otherwise oiling
will be not proper.Take any a4 size of paper or news paper.A4 printer paper (maximum used for printer and xerox
machine)is good as that have at least a small depth which help to prevent wet of a paper when you will spray oil on
that paper.Apply only the manufacturer approved oil what you can find from the manual or you can ask to the help
line number of the shredder manufacturing company.All oil not shoots with every paper shredder.What the paper method is method of oiling using a paper.You can apply oil on the zig zag way on a paper.You have to put more oil might be according to the need.But not go for completely wet a paper with oil. Then switch on the paper shredder and shred the oiled paper.On the one side that paper will shred on the other hand the oil will absorbed by the paper shredder blades at the time of shredding.The oil will get from the oily paper.Turn the shredder on and run the oiled piece of paper through the shredder. As the paper shreds, the oil that has been absorbed by the paper will lubricate the
blades. The motion of the blades will distribute oil so the shredder continues to operate smoothly.Once oiling done shred more bunch of paper which will help to absorb the exceed oil from the shredder.
The Paperless Method:
First of all for that method you have to set the mode of shredder as manual mode which will help to control the
direction of blades and motion time.Then turned of the system.Squirt or spray the oil in to the paper entry area.As
that the face of the blade start.So if you oil there it automatically come to shredder blade.Then start the paper
shredder for next ten to twenty seconds in reverse mode.Which will help to distribute the oil to the other cutting
assembly or parts properly.Then do the same what you have for the paper method just shred some paper to absorb the excess oil of the machine(if the oil comes more or exceed in the machine).